The APC SMC2000I is a 2000VA / 1300W line-interactive Smart-UPS C tower unit with pure sine wave output and a graphic LCD, designed to protect servers, point-of-sale, and network equipment during power problems. As an APC product from Schneider Electric, it combines Automatic Voltage Regulation, high green-mode efficiency, and intelligent battery management in a cost-effective package for small and medium businesses in Dubai and across the UAE.
The SMC2000I is sized for the equipment most businesses cannot afford to lose during a power cut or voltage dip. It keeps systems running long enough for a safe shutdown or for a generator to take over.
A UPS is only useful if it is sized correctly, and that is where buying from a specialist beats an online marketplace. Our engineer will help you match capacity and runtime to your actual load before you spend, and we stock the full APC Smart-UPS C range (SMC1000I, SMC1500I, SMC2000I, and SMC3000I) plus the online double-conversion SRT range for more critical loads. We also supply genuine APC replacement batteries, so the unit stays protected for years. Everything is held in Dubai for fast UAE delivery, with export across the GCC and African markets through our Mumbai sourcing arm.
What can the APC SMC2000I power, and for how long?
The APC SMC2000I supplies up to 2000 VA / 1300 W, enough for entry-level servers, point-of-sale systems, routers, switches, and small network racks. Runtime depends on the connected load: expect several minutes at full load, extending to roughly 15 minutes or more at around half load. For a precise runtime figure, send us your load in watts and we will calculate it.
Is the SMC2000I a pure sine wave UPS, and why does that matter?
Yes, the SMC2000I delivers pure sine wave output. This matters because modern servers and equipment with active PFC power supplies can misread a stepped or simulated sine wave and shut down or behave unpredictably on battery. Pure sine wave power keeps this equipment running cleanly during an outage.
What is the difference between the line-interactive SMC and online SRT APC UPS ranges?
The SMC2000I is line-interactive with Automatic Voltage Regulation, which corrects minor voltage sags and surges without using the battery and is cost-effective for servers, POS, and network gear. The APC SRT range is online double-conversion, continuously rebuilding the waveform with zero transfer time for the most sensitive or critical loads. We stock both, so we can match the topology to how critical your equipment is.
Can the SMC2000I battery be replaced, and how long does it last?
Yes. The SMC2000I uses a built-in sealed lead-acid battery that is user-replaceable using the correct APC replacement battery cartridge, and it is hot-swappable so you can change it without powering down. Typical battery life is three to five years depending on temperature and cycling. We supply genuine replacement batteries from Dubai stock.
Which APC UPS size do I need - 1000, 1500, 2000 or 3000 VA?
Choose the UPS by the total wattage of the equipment you want to protect plus the runtime you need. As a guide, the APC Smart-UPS C range runs SMC1000I (600 W), SMC1500I (900 W), SMC2000I (1300 W), and SMC3000I (2100 W). Size the UPS above your load so it is not running at full capacity, and contact us with your equipment list for a recommendation.
| SKU | MAS04248SMC2000I |
|---|---|
| Weight (kg) | 27.500000 |
| Manufacturer | APC |
| Rated Frequency | 50/60 Hz |
| Model Number | SMC2000I |