Schneider Electric ATV610D15N4 Altivar Easy 610 Variable Speed Drive – 15 kW / 20 HP – 380…415 V – IP20

The Schneider Electric ATV610D15N4 is a 15 kW (20 HP) Altivar Easy 610 variable speed drive rated 380-460 V three-phase for pump and fan control. It drives three-phase asynchronous and synchronous motors for variable-torque process loads, and is factory-preset for plug-and-play commissioning in water, HVAC, oil and gas and building-management applications. This is genuine Schneider Electric stock supplied by Electrical Junction in Deira, Dubai.

Quick Specs

• Part number ATV610D15N4, Schneider Altivar Easy 610 range, variable speed drive.
• Power rating 15 kW / 20 HP for normal duty (up to 120% overload), 11 kW / 15 HP for heavy duty (up to 150% overload).
• Rated supply voltage 380-460 V, three-phase, -15/+10%, 50/60 Hz.
• Protection rating IP20, forced-convection cooling, integrated Category C3 EMC filter to IEC/EN 61800-3 edition 2.
• Continuous output current approximately 31.7 A at 4 kHz (normal duty); Modbus RS485 serial and RJ45 terminal connection.
• Genuine Schneider Electric stock in Dubai, with engineer-checked sizing before dispatch across the UAE and GCC.

Applications and Compatibility

The ATV610D15N4 is designed for variable-torque loads and is best suited to pumps, fans, compressors and conveyors rather than high-dynamic machine control. Typical uses include intake, boosting and lifting pumps and aeration blowers in water and wastewater, circulating and drain pumps in oil and gas, and fans and circulating pumps in building management. It controls both asynchronous and synchronous three-phase motors and integrates with control systems over Modbus.

Why Buy From Electrical Junction

Electrical Junction is a Dubai-based supplier of genuine Schneider Electric, ABB and Lovato switchgear and drives, backing every order with real technical support rather than a ticket queue. International and export inquiries are handled directly by our engineer, Ahamed Firdhous, who confirms drive sizing and duty rating before dispatch. We hold stock for fast UAE and GCC delivery, support exports to KSA, Iraq, Kenya and Nigeria through Jebel Ali, and assist with SASO/SABER documentation for Saudi Arabia shipments.

Frequently Asked Questions

What is the difference between the Altivar Easy 610 (ATV610) and the Altivar Machine range (ATV320/ATV340)?

The Altivar Easy 610 (ATV610) is a process drive built for variable-torque loads such as pumps, fans, compressors and conveyors, not for high-dynamic machine control. If you are driving a pump or fan in water, HVAC or oil and gas, the ATV610D15N4 is the correct family; for OEM machine axes needing fast dynamic response, the Altivar Machine ATV320 or ATV340 range applies instead.

What is the actual input voltage range of the Schneider ATV610D15N4?

The ATV610D15N4 has a rated supply voltage of 380 to 460 V, three-phase, with a tolerance of -15 percent to +10 percent, at 50 or 60 Hz. Schneider lists the model under a 380 to 415 V naming label, but the datasheet rated supply voltage covers 380 to 460 V, so it suits UAE and GCC 400 V and 415 V three-phase supplies.

Does the ATV610D15N4 have a built-in EMC filter?

Yes, the ATV610D15N4 has an integrated Category C3 EMC filter as standard, compliant with IEC/EN 61800-3 edition 2 for environment 1 or 2. No external filter is required for standard C3 installations, which reduces panel space and wiring.

What is the difference between the 15 kW and 11 kW ratings on this drive?

The ATV610D15N4 is rated 15 kW / 20 HP for normal-duty applications with up to 120 percent overload, and 11 kW / 15 HP for heavy-duty applications with up to 150 percent overload. Size it against your motor power and the load profile: pump and fan duty uses the 15 kW rating, higher-overload loads use the 11 kW rating.

Is this a genuine Schneider ATV610D15N4 and is it available in the UAE?

Yes, this is a genuine Schneider Electric ATV610D15N4 supplied by Electrical Junction in Deira, Dubai, with stock for fast UAE and GCC dispatch. Our engineering team can confirm sizing and duty rating before dispatch, and we assist with SASO/SABER documentation for Saudi Arabia exports.